STAHLWERK welding machine MIG MAG 200 ST PLUS inert gas welding machine | IGBT inverter with 200 A, synergic wire feed, FLUX, Lift-TIG and MMA | ARC function

• MIG MAG - metal arc welding with direct current (DC). Welding can be carried out with inactive/inert (MIG, e.g. argon) or with active (MAG, e.g. CO2) gases. Gas and welding wire come from a torch head and enable welding work to be carried out with just one hand.
• Synergic wire feed - The wire feed speed is controlled fully automatically via the welding current.
• Combination welding machine - The welding machine combines the MIG MAG / FLUX / Lift-TIG / MMA ARC welding processes in one device.
• IGBT technology - Latest and most modern transistor technology enables maximum performance and duty cycle (ED)! No transformer, no MOSFET, state-of-the-art IGBT!
• Highest efficiency & performance - single-phase alternating current (230V) supplies the device and allows an output power of real 200 amps.
• Smart cooling & overheating protection - State-of-the-art technology, integrated overheating protection and high-performance cooling enable maximum performance to be achieved.
• Inductance - continuously adjustable choke, which smoothes the welding current and improves the welding quality and ignition properties.

• Anti-stick. If the electrode sticks to the workpiece, the welding current is automatically reduced. The electrode does not burn out and is easier to remove from the workpiece.
• Hotstart - Automatic voltage increase at start for better ignition results. Prevents the stick electrode from sticking by briefly superimposing the set welding current and warms up the start of the weld seam more quickly.
• Overheating protection - kicks in as soon as the device is overloaded and goes out as soon as the device cools down again.
• Smart cooling - A powerful fan enables maximum duty cycle to be achieved through excellent cooling.
• ST-Guard housing - Is ergonomic, robust and operationally safe. The control panel is conveniently accessible and intuitive to use.
• LED lighting - As a special highlight, the welding machine has an integrated LED light to illuminate the wire guide, which enables the wire roll to be changed quickly even in poor visibility conditions. This switches on automatically when the protective flap is opened.

Note: The device is not intended for use in residential areas where power is supplied via a public low-voltage supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.

• 1 x STAHLWERK welding machine MIG MAG 200 ST PLUS
• 1 x professional MIG welding torch AK-15 / hose package 3 m with Euro central connection
• 1 x gas connection hose with quick coupling 5 m
• 2 x wire guide rollers 0.8/1.0 mm (one is already pre-assembled)
• 1 x quick coupling gas pressure reducer including O-seal
• 1 x Allen key
• 2 x contact tips 0.8 mm (pre-assembled once)
• 1 x 1.0mm contact tip
• 1 x ground cable 3 m
• 1 x Slag Hammer
• 1 x Wire Brush
• 1 x Assembly Wrench
• 1 x Protective Case
• 1x CH fixed adapter 16A